Transfer wireless TV signal

The television signal can be transmitted from one LCD to another video display, provided that both have the video inputs and outputs. The system of wireless audio / video transmission ( wireless AV transmitter ) can transfer the signal and is available in an electronics store or in the section accessories store TVs. Audio / video cables that are present in most households, but which can be derived from the same stores as a wireless audio / video transmission system should be used.

Place the wireless TV transmitter immediately after the TV (By the way, if your TV has an HDMI port, you must use the HDMI transmitter to the HDMI jack). Connect the power cord to a wall outlet. Insert one end of the video cable to the video output on the rear panel TV (with the inscription "Composite" on some sets). Plug the other end of the video cable to the video input transmitter, etc. , Repeat this process with the audio cable, only connect the red and white plugs on one end in the red and white outputs on the TV, and the red and white transmitter inputs etc.     

Place the wireless TV receiver next to the video screen on which you want to watch the TV signal transmitted over a wireless network, such as another TV. Plug the receiver's power cord into the outlet. Insert one end of the video cable to the video input on the rear panel video display device. Plug the other end of the video to the video output on the receiver. Repeat this procedure with an audio cable, only the red and white plugs on one end in the red and white outputs on the receiver and the red and white plugs on the other end in the red and white input video device display.    

Turn on the TV to which the wireless transmitter connected TV. Turn on the video display device to which the wireless receiver connected to a TV. Press the "Menu" button on the remote control that controls the video display device.

Go through the settings until you come to "Input Video" or the menu name. Select this menu. Select the video input to which you've connected the video cable. click "OK" "button Enter" or, depending on the brand of the remote control. Press the "Menu" button to exit the settings, so you can view the TV signal is transmitted to the video display device.

Good news: PAKITE wireless HDMI transmitter and receiver with HDMI socket soon, and HDMI sender used for TV devices with an HDMI port. Waiting for your request for a wireless HDMI transmitter.    

Source:  The transfer of the wireless TV signal